| 价格 | 面议 |
|---|---|
| 品牌 | GE |
| 区域 | 全国 |
| 来源 | 东莞宜展塑胶原料有限公司 |
详情描述：
特点：LNP* Stat-loy* PMMA 9X05426C 是一个含有防静电的复合PMMA树脂，这种材料的新增功能包括：抗静电剂。 LNP STAT-LOY PMMA 9X05426C LNP? STAT-LOY? Compound PMMA 9X05426C Also known as:LNP? Stat-loy? Compound PDX-05426 CCS BL5-343-2 TP Product reorder name:9X05426C LNP* Stat-loy* 9X05426C is a compound based on PMMA resin containing Anti-Static. Added features of this material include: Antistat. Property TYPICAL PROPERTIES(1) MECHANICAL Value Unit Standard Tensile Stress,yield 430 kgf/cm? ASTM D 638 Tensile Stress,break 410 kgf/cm? ASTM D 638 Tensile Strain,yield 6.7 % ASTM D 638 Tensile Strain,break 18.4 % ASTM D 638 Tensile Modulus,50mm/min 17800 kgf/cm? ASTM D 638 Flexural Stress 560 kgf/cm? ASTM D 790 Flexural Modulus 16900 kgf/cm? ASTM D 790 Tensile Stress,yield 42 MPa ISO 527 Tensile Stress,break 39 MPa ISO 527 Tensile Strain,yield 6.2 % ISO 527 Tensile Strain,break 20.3 % ISO 527 Tensile Modulus,1mm/min 1470 MPa ISO 527 Flexural Stress 44 MPa ISO 178 Flexural Modulus 1410 MPa ISO 178 IMPACT Value Unit Standard Izod Impact,unnotched,23℃ 54 cm-kgf/cm ASTM D 4812 Izod Impact,notched,23℃ 3 cm-kgf/cm ASTM D 256 Instrumented Impact Energy @ peak,23℃ 29 cm-kgf ASTM D 3763 Multiaxial Impact 7 cm-kgf ISO 6603 Izod Impact,unnotched 80*10*4 23℃ 45 kJ/m? ISO 180/1U Izod Impact,notched 80*10*4 23℃ 4 kJ/m? ISO 180/1A THERMAL Value Unit Standard HDT,0.45 MPa,3.2mm,unannealed 79 ℃ ASTM D 648 HDT,1.82 MPa,3.2mm,unannealed 67 ℃ ASTM D 648 CTE,-40℃ to 40℃,flow 1.01E-04 1/℃ ASTM E 831 CTE,-40℃ to 40℃,xflow 1.08E-04 1/℃ ASTM E 831 CTE,-40℃ to 40℃,flow 1.01E-04 1/℃ ISO 11359-2 CTE,-40℃ to 40℃,xflow 1.09E-04 1/℃ ISO 11359-2 HDT/Bf,0.45 MPa Flatw 80*10*4 sp=64mm 79 ℃ ISO 75/Bf HDT/Af,1.8 MPa Flatw 80*10*4 sp=64mm 70 ℃ ISO 75/Af PHYSICAL Value Unit Standard Density 1.14 g/cm? ASTM D 792 Mold Shrinkage,flow,24 hrs(5) 0.8 % ASTM D 955 Mold Shrinkage,xflow,24 hrs(5) 1 % ASTM D 955 Mold Shrinkage,flow,24 hrs(5) 0.82 % ISO 294 Mold Shrinkage,xflow,24 hrs(5) 0.98 % ISO 294 Density 1.13 g/cm? ISO 1183 ELECTRICAL Value Unit Standard Volume Resistivity 1.E 09-1.E 11 Ohm-cm ASTM D 257 Surface Resistivity 1.E 09-1.E 11 Ohm ASTM D 257 Source GMD,last updated:2007/02/27 Parameter Injection Molding Value Unit Drying Temperature 75-90 ℃ Drying Time 4 hrs Maximum Moisture Content 0.01 % Nozzle Temperature 215-240 ℃ Front-Zone 3 Temperature 215-240 ℃ Middle-Zone 2 Temperature 215-240 ℃ Rear-Zone 1 Temperature 215-240 ℃ Mold Temperature 25-90 ℃ Source GMD,last updated:2015/02/27
| 联系人 | 向万琳 |
|---|
