BASFTPU 1185A10XU 低温韧性抗紫外线

详情描述：

? 特点：BASF Corp. Thermoplastic Polyurethanes Elastollan TPU 1185A10XU 是一款低温韧性，抗紫外线，抗菌，耐磨蚀，水解稳定和含紫外线稳定剂的热塑性聚氨酯弹性体（聚醚）。
? TPU 1185A10XU 低温韧性,抗紫外线,耐磨蚀
 
 
 
 
 
Elastollan? TPU 1185A10XU
热塑性聚氨酯弹性体（聚醚）
BASF Corp. Thermoplastic Polyurethanes
 
产品说明
Elastollan? 1185A10XU is a polyether-based thermoplastic polyurethane (TPU) with UV stabilizer and a MFI value of 41-60 (at 190℃/21.6 kg). It is specifically formulated for extruded profiles, sheet and film applications. It exhibits excellent abrasion resistance, toughness, transparency, low temperature properties, hydrolytic stability and fungus resistance. As with all TPU products, Elastollan 1185A10XU must be dried before processing. The drying step is required to both dry the granules and also maintain a low moisture content until the product enters the processing equipment. The water content must be less than 0.03% before processing. The typical drying conditions should be 2-4 hours @ 175?-195℉ (80?-90℃). Elastollan 1185A10XU can be stored for up to 1 year in its original container. Containers should be stored in a cool and dry area.
 
含添加剂：紫外线稳定剂
材料特点：低温韧性，抗紫外线，抗菌，耐磨蚀，水解稳定
材料用途：薄膜，片材，型材
材料外观：清晰/透明
加工方法：挤出
产品形式：颗粒料
塑料牌号：TPU 1185A10XU
定属记号：TPU-聚醚
 
胶料物性
物理性能
额定值
单位制
测试方法
比重
1.12
g/cm?
ASTM D792
硬度
额定值
单位制
测试方法
硬度计硬度(邵氏 A)
86
 
ASTM D2240
机械性能
额定值
单位制
测试方法
拉伸模量
20.7
MPa
ASTM D638
弯曲模量
31.0
MPa
ASTM D790
抗泰伯磨耗(1000 g,H-18 转轮)
30.0
mg
ASTM D1044
弹性体
额定值
单位制
测试方法
拉伸应力
 
 
ASTM D412
100%应变
7.58
MPa
300%应变
12.1
MPa
抗张强度(断裂)
33.1
MPa
ASTM D412
伸长率(断裂)
640
%
ASTM D412
断裂伸长率
70
%
ASTM D412
撕裂强度2
105
kN/m
ASTM D624
压缩变形
 
 
ASTM D395B
23℃,22.0 hr
25
%
70℃,22.0 hr
45
%
补充信息
The value listed as Tensile Modulus ASTM D638,was tested in accordance with E-Modulus ASTM D412.
挤出
额定值
单位制
干燥温度
79.4 到 90.6
℃
干燥时间
2.0 到 4.0
hr
建议的大水分含量
0.030
%
熔体温度
182 到 204
℃