網線不夠長或斷了怎麼辦

详情描述：

綜合布線工程中，如果網線不夠長或網線斷了該怎麼辦好?
纏繞接法：將網線中的8芯線分別剝線，每一芯線擰結實就好，兩根相同線序的網線相互纏繞在一起，並通過絕緣膠布進行纏繞;
接線子法：將網線兩端插入轉接子並固定即可，百兆網絡可以只連接1、2、3、6四芯銅線，千兆的話就需要8根網線都連接起來。
連接頭法：把不夠長的網線一端做好水晶頭，直接插到連接器上，另一端，再用水晶頭連接另一條網線。
焊接法：把網線中的8芯線，分別焊接。
* * * * * *
創世服務有限公司是一間提供專業數據中心架設公司，擁有一群專業團隊貼心地關注客戶的要求，並提供優質的服務。
想了解更多關於「網線不夠長或斷了怎麼辦」的內容，請瀏覽創世官網：http://livservices.com.hk
地址: 香港觀塘鴻圖道37-39號鴻泰工業大廈4樓4室
電話：852-31063235
——————
What should I do if the network cable is not long enough or 
broken?
Winding connection method: the eight core wires in the network cable are 
stripped separately, and each core wire is screwed and solid, and two network 
wires of the same wire sequence are entangled with each other and wound by an 
insulating tape;
Wiring method: Insert the two ends of the network cable into the adapter and 
fix it. The 100M network can only connect 1, 2, 3, and 6 core copper wires. If 
you have Gigabit, you need 8 network cables to connect.
Connector method: Make one end of the cable that is not long enough to make 
the crystal head, directly plug it into the connector, and at the other end, 
connect the other cable with the crystal head.
Welding method: The 8-core wires in the wire are welded separately.
* * * * * *
LIV is a professional data center to set up a company, with a group of 
professional team intimate attention to customer requirements, and provide 
quality services.
For more information about 'What should I do if the network cable is not long 
enough or broken?'，please visit : http://livservices.com.hk
Address: Unit 4, 4/F., Hung Tai Industrial Building,37-39 Hung To Road, Kwun 
Tong, Hong Kong
Tel:  852 3106 3235