光纖熔接容易出現哪些問題

详情描述：

進行光纖熔接時，若省略一些步驟或操作未到位，可能會影響終的熔接效果。
光纖熔接容易出現哪些問題?
1.熔接前不清潔光纖：光纖清潔不到位，熔接時可能會出現灰塵燃燒、光纖在V型槽固定位置發生偏移，終導致熔接損耗變大。
2.使用不當的切割工具：光纖端面不夠平滑，會影響光纖的性能。
3.光纖熔接前不進行校準：熔接機也許會需要多次重新測試來進行調整，才能確保工作性能。
4.光纖微彎曲：光纖微彎曲會導致信號質量下降，且光纖微彎曲很難憑肉眼發現。
5.光纖過度彎曲：光纖過度彎曲會損壞光纜及護套內的光纖，嚴重影響信號傳輸。
6.重複使用舊的擦拭紙：使用過的擦拭紙，如果再擦拭其他連接器，會污染其他連接器。
7.安裝前不檢查和清潔連接器端面：連接器端面是一個極易受到灰塵、油污污染的地方，不檢查或清潔會導致信號質量下降。
* * * * * *
創世服務有限公司是一間提供專業數據中心架設公司，擁有一群專業團隊貼心地關注客戶的要求，並提供優質的服務。
想了解更多關於「光纖熔接容易出現哪些問題」的內容，請瀏覽創世官網：http://livservices.com.hk
地址: 香港觀塘鴻圖道37-39號鴻泰工業大廈4樓4室
電話：852-31063235
——————
What are the problems with fiber fusion?
1. Uncleaned fiber before welding: The fiber is not cleaned. When the welding 
is done, dust may burn and the fiber may be offset at the fixed position of the 
V-groove, resulting in a large welding loss.
2. Improper use of cutting tools: The end face of the fiber is not smooth 
enough to affect the performance of the fiber.
3. The fiber is not calibrated before welding: The splicer may need to be 
retested several times to make adjustments to ensure performance.
4. Micro-bending of the fiber: Micro-bending of the fiber causes the signal 
quality to drop, and the micro-bending of the fiber is difficult to find by the 
naked eye.
5. Excessive bending of the fiber: excessive bending of the fiber will damage 
the fiber optic cable and the fiber inside the sheath, seriously affecting 
signal transmission.
6. Reuse old wipes: Used wipes, if you wipe other connectors, it will 
contaminate other connectors.
7. Do not check and clean the connector end face before installation: The 
connector end face is a place that is highly susceptible to dust and oil 
contamination. Failure to check or clean may result in deterioration of signal 
quality.
* * * * * *
LIV is a professional data center to set up a company, with a group of 
professional team intimate attention to customer requirements, and provide 
quality services.
For more information about 'What are the problems with fiber fusion?'，please 
visit : http://livservices.com.hk
Address: Unit 4, 4/F., Hung Tai Industrial Building,37-39 Hung To Road, Kwun 
Tong, Hong Kong
Tel:  852 3106 3235