物理造雪 雪质更好更安全 雪场大型造雪机 嬉雪设备

详情描述：

造雪机的保养。
Maintenance of snowmaker.
1.清洗过滤器，先取出滤网，用高压水枪彻底冲洗干净，然后安装到雪机上；
1. Clean the filter, take out the filter first, wash it thoroughly with high-pressure water gun, and then install it on the snow machine;
2.卸掉核子器，拆开清理，用清水刷洗干净后，再安装到雪机上；
2. Remove the nuclear device, disassemble it for cleaning, brush it with clean water, and then install it on the snow machine;
3.清洗水嘴，每排水嘴需要单独清理，清理完毕后安装到雪机上；
3. Clean the water nozzles. Each water nozzle needs to be cleaned separately. After cleaning, install it on the snowplow;
4.造雪机中架与底部的三角架连接轴承上需要加注黄油；
4. The bearing connecting the middle frame and the tripod at the bottom of the snowmaker shall be filled with grease;
5.拆开分水器滤网盖子，在密封圈位置抹点机油；
5. Remove the filter screen cover of the water separator and apply some engine oil on the sealing ring;
6.造雪机冲洗干净，大线外边，轮胎上的脏东西清理干净；
6. Wash the snowmaker, clean the outside of the large line and clean the dirt on the tires;
7.造雪机拉到仓库之后，需要把轮子都支起来。
7. After the snow maker is pulled to the warehouse, all wheels need to be supported.
物理造雪 雪质更好更安全 雪场大型造雪机 嬉雪设备