升級數據網絡系統 讓企業無論何地都能輕鬆辦公

详情描述：

傳統數據網絡要求使用RJ45模塊化插頭在現場終端CAT5e、CAT6以及CAT6a，如果網絡複雜，所需的RJ45組件和終端數量就越多。另外，RJ45模塊化插頭放置在電纜上前，需要將導體修整到規定長度。導體太短，電路會保持斷開狀態;導體太長，會使線對裸露在插頭主體或電纜護套外，有可能會影響網絡性能，失敗率達60%。
Ideal 
Industries的FT-45單件式直通連接器和應用工具，使安裝人員無需組裝三件式連接器。無論使用CAT5e、CAT6，還是CAT6a電纜，都能使端接效率更快、簡單且一致。無需將導線修剪成特定長度，安裝人員只需卸下線纜套的適當部分(有中心花鍵則取下)，將雙絞線以正確順序解開，穿過連接器，然後端接並用穿通工具刮掉多餘部分即可。
* * * * * *
創世服務有限公司是一間提供專業數據中心架設公司，擁有一群專業團隊貼心地關注客戶的要求，並提供優質的服務。
想了解更多關於「升級數據網絡系統」的內容，請瀏覽創世官網：http://livservices.com.hk
地址: 香港觀塘鴻圖道37-39號鴻泰工業大廈4樓4室
電話：852-31063235
——————
Upgrade the data network system so that enterprises can easily work 
anywhere
Traditional data networks require the use of RJ45 modular plugs in the field 
terminals CAT5e, CAT6 and CAT6a. If the network is complex, the more RJ45 
components and terminals are required. In addition, before the RJ45 modular plug 
is placed on the cable, the conductor needs to be trimmed to a precise length. 
If the conductor is too short, the circuit will remain disconnected; if the 
conductor is too long, the wire pair will be exposed outside the plug body or 
the cable sheath, which may affect the network performance, and the failure rate 
can reach 60%.
Ideal Industries' FT-45 one-piece feed-through connector and application 
tools eliminate the need for installers to assemble three-piece connectors. 
Whether using CAT5e, CAT6, or CAT6a cables, the termination efficiency can be 
faster, simpler and consistent. There is no need to trim the wire to a specific 
length. The installer only needs to remove the appropriate part of the cable 
sleeve (remove if there is a central spline), untie the twisted pair in the 
correct order, pass through the connector, and then terminate and use Scrape off 
the excess part with a through tool.
* * * * * *
LIV is a professional data center to set up a company, with a group of 
professional team intimate attention to customer requirements, and provide 
quality services.
For more information about 'Upgrade data network system'，please visit : 
http://livservices.com.hk
Address: Unit 4, 4/F., Hung Tai Industrial Building,37-39 Hung To Road, Kwun 
Tong, Hong Kong
Tel:  852 3106 3235