现贷销售Star L PA6 D51

详情描述：

特点：Eurostar Engineering Plastics Star L PA6 D51 is a 15% PTFE Lubricated, Unreinforced, Polyamide 6 Injection Molding Resin
PA6 D51 含PTFE润滑剂(15%)
 
 
 
                                              
Star L PA6 D51
聚酰胺6
Eurostar Engineering Plastics
产品说明
Star L PA6 D51 is a 15% PTFE Lubricated, Unreinforced, Polyamide 6 Injection Molding Resin
含添加剂：PTFE润滑剂(15%)
材料特点：经润滑
加工方法：注射成型
定属记号：尼龙6
产品牌号：Star L PA6 D51
材料物性
物理性能
额定值
单位制
测试方法
比重
1.22
g/cm?
ASTM D792
收缩率-流量(4.00 mm)
1.8 到 2.2
%
Internal Method
机械性能
额定值
单位制
测试方法
拉伸应力(屈服)
62.0
MPa
ISO 527-2
拉伸应变(断裂)
12
%
ISO 527-2/5
弯曲模量
2200
MPa
ISO 178
弯曲强度
84.0
MPa
ISO 178
冲击性能
额定值
单位制
测试方法
悬壁梁缺口冲击强度(23℃)
5.5
kJ/m?
ISO 180/1A
无缺口伊佐德冲击强度(23℃)
50
kJ/m?
ISO 180/1U
热性能
额定值
单位制
测试方法
热变形温度(0.45 MPa,未退火,100 mm 跨距)
110
℃
ISO 75-2/Af
溶融温度(DSC)
225
℃
ISO 3146
注射
额定值
单位制
干燥温度
75.0 到 85.0
℃
干燥时间
4.0 到 6.0
hr
水分含量
0.20
%
螺筒后部温度
230 到 240
℃
螺筒中部温度
235 到 245
℃
螺筒前部温度
240 到 260
℃
加工(熔体)温度
240 到 260
℃
模具温度
60.0 到 80.0
℃
PROCESSING PARAMETERS : see above typical molding conditions.
DRYING : is not essential when material is delivered in sealed bags with moisture content below 0.2 %.
BARRELS, SCREWS, MOULDS : use wear resisting steel or alloy such as bimetallic cylinders, nitrided screws.
USE OF REGRIND : the properties of the component should be checked in order to ascertain the maximum acceptable level of regrind.
SAFETY : please refer to Material Safety Datasheet.
Eurostar Engineering Plastics 40 Years History
1972 Creation of Eurostar
Fosses is one of the first independent French manufacturing sites dedicated to glass fiber reinforced polyamide manufacturing. One of the founder’s shareholders is the Owens Corning Company that stayed into the capital for more than 10 years.
1983 Buy out of Eurostar by Ferro: the company becomes Ferro-Eurostar
While still mainly acting in France, Ferro brings resources that increase Eurostar production capacities and implements a mature industrial organization.
Starflam brand name starts having an European expansion.
1995 Buy out of Ferro-Eurostar by LNP: the company becomes LNP-Eurostar
LNP is an American Company specialized in compounding that was created in 1948. At that time, it was owned by the Kawasaki Steel Company.
Ferro’s decision to sell the business is driven by a new company policy orientation that focuses on the historical company skills in Europe (pigments).
LNP is one of the global players in highly valued compounds. The sell of Eurostar is an opportunity that the company takes with no hesitation in order to extend its product range with the addition of polyamide and polypropylene compounds.
It also brings to Eurostar an access to a new customer’s portfolio and increases the site capabilities to develop engineering compounds. LNP elevates the site quality standards and implements a culture of quality.
2002 Buy out of LNP by GE Plastics
Following up its buy out by the Nippon Steel Company, Kawasaki Steel focuses its activity on steel manufacturing.
GE Pastics makes a strategic investment to position itself on the engineering plastics market one of the product gap at that time whereas the growth potential is high.
LNP becomes part of a conglomerate which global strength is not argued.
GE opens to LNP R&D capabilities that lead to designing and launching the Starflam Xgen platform, developed and manufactured at Fosses. GE brings to Eurostar a strong culture of risk management and process control and monitoring at each level of the company processes.
2007 Buy out of GE Plastics by SABIC
This new business unit adds up to SABIC traditional business units. It becomes SABIC Innovative Plastics.
2010 Managers Buy Out, company becomes